Πλαϊνό τέντας μαρκίζας Rain Outside M (220 - 240)

€285.00
Tax included
165022400

Delivery in 6-8 weeks

Πληρωμή και σε 3 άτοκες δόσεις

Categories
Sun Awnings
Categories
Poles & Accessories

Equipment:

  • The front wall parts can be pulled into the piping rail of the awning front profile via piping.
  • The individual front wall modules can be connected to each other using a zipper. The desired total width (= awning size designation) can be put together and achieved using the different front wall widths.
  • Each individual front wall module can be rolled up.
  • The front wall is equipped with plug-in box parts for attaching a seat belt (option).
  • The side walls are stretched using a tension rod between the awning box and the front profile.
  • The side walls are universal and can therefore be installed on the right or left.
  • The L-Van side wall for panel vehicles (Fiat Ducato, VW Crafter) has an optimized cut and a fixing strap on the vehicle side.
  • The side walls can be supplemented on the vehicle side with foam beads (option) and pressure rods (option) and thus offer an optimized finish to the vehicle.
  • The front and side walls can be connected using zippers; the required connection adapters (optional) are conveniently attached using piping and double piping rails in just a few steps.
  • All wall parts have a double earth strip at the bottom with a flexible floor bracing in between. The bracing points can therefore be freely selected.
  • The windows have tinted tent window films, reduce the visibility into the interior and give the view a pleasant light.
  • Predominantly high-frequency welded seams, robust and weather-resistant.


Material:
The fabric used is a polyester fabric coated with PVC on both sides and is completely washable.

Poles:
each side wall is equipped with a steel tension rod (25 x 1 mm) for fastening (suspension).

 

When choosing different front wall widths, make sure that your front wall consists of at least 2 parts with a width greater than 100 cm. With the width 100 (door part) you can add the desired size.

Rain Outside front wall wall parts suitable for the awning models from Thule/Omnistor (series 5, 6, 8 and 9) and Fiamma (series F45, F80) as well as Dometic (series PW 1100, 1500 and PR 2000, 2500).

Click on a thumbnail to load the video

You might also like

10 other products in the same category: